If your Kenmore Elite fridge is not cooling, but the freezer is running, it can be a frustrating experience. There are several potential causes for this trouble. However, a number of the most commonplace encompass:
- Dirty condenser coils
- Blocked air damper
- Faulty temperature sensor
- Defective defrost timer
- Broken evaporator fan motor
- Clogged refrigerant line
- Leaking refrigerant
Here’s a great look at the causes of each of these capabilities, as well as some troubleshooting guidelines and tips on recovering from the problem:
Dirty Condenser Coils
Condenser coils are responsible for evaporating warmness from the fridge. If they end up dirty or clogged, they’ll not be capable of doing their job efficiently, and the refrigerator will not cool nicely. Unplug the fridge to clean the condenser coils.
The rings are usually placed at the bottom of the fridge and the back of the grille. Use a vacuum cleaner with a brush attachment to remove any dirt or debris from the coils. You can also use a coil cleaner to assist in loosening and getting rid of any stubborn dust or dirt. Once you’ve cleaned the condenser coils, plug the fridge in and give it a few hours to cool down. If the refrigerator continues not cooling correctly, the trouble can be elsewhere.
Blocked Air Damper
The air damper is a valve that controls the flow of cold air from the freezer to the fridge compartment. If the air damper is blocked, it will prevent the refrigerator from cooling well. Unplug the fridge and open the freezer door to look at the air damper. It would help to see a vent on the top of the freezer compartment. The air damper is located behind the vent. Use a flashlight to appear inside the vent and see if the air damper is open. You must clear the obstruction if the air damper is closed or blocked.
Faulty Temperature Sensor
The temperature sensor tells the fridge how bloodless it is inside. If the temperature sensor is faulty, it can send wrong facts to the fridge, which could cause the refrigerator to no longer cool nicely. To look at the temperature sensor,
You may want a multimeter. Set the multimeter to study ohms and area the probes at the temperature sensor terminals. The resistance should be examined between 10,000 and 15,000 ohms at room temperature. If the resistance is outside this range, the temperature sensor is defective and wishes to be replaced.
Defective Defrost Timer
The defrost timer controls the defrost cycle. If the defrost timer is defective, it cannot start the defrost cycle well, which may cause ice to accumulate on the evaporator coils. It can save you the fridge from cooling correctly. To look at the defrost timer, you’ll need a multimeter. Set the multimeter to study the ohms and region of the probes on the defrost timer terminals. The resistance has to read zero ohms while the defrost timer is inside the defrost cycle and endless ohms when the defrost timer is in the cooling process. If the resistance is as described, the defrost timer is fixed and wishes to be replaced.
Broken Evaporator Fan Motor
The evaporator fan motor circulates cold air throughout the fridge compartment. If the evaporator fan motor is broken, it will not be able to distribute the bloodless air efficaciously, and the refrigerator will not cool well. To check the evaporator fan motor, you’ll want a multimeter.
Set the multimeter to read ohms and vicinity of the probes on the evaporator fan motor terminals. The resistance has to study between 10 and 20 ohms. Suppose the opposition is out of doors of this variety. In that case, the evaporator fan motor is damaged and desires to be replaced.
Clogged Refrigerant Line
The refrigerant line is the tube that carries refrigerant from the compressor to the evaporator coils. If the refrigerant line becomes clogged, it will prevent the refrigerant from flowing well, and the refrigerator will not cool properly. Unplug the fridge and disconnect the refrigerant cable from the compressor and evaporator coils to test the refrigerant line. Look inside the refrigerant line for any signs and symptoms of clogging. You’ll want to clean the obstruction if the refrigerant pipe is clogged.
Leaking Refrigerant
If the refrigerant leaks, it will not be able to cool the refrigerator nicely. Refrigerant leaks can occur anywhere within the refrigerant machine. Still, they may be most common within the compressor and evaporator coils. You’ll want a refrigerant leak detector to test for a refrigerant leak. Spray the refrigerant leak detector around all connections within the refrigerant device. The refrigerant leak detector will beep if there is a refrigerant leak leak. If you find a refrigerant leak, you will want to repair the leak or update the leaky issue.
Conclusion
If your Kenmore Elite fridge isn’t constantly cooling. Still, the freezer is working, and it is essential to troubleshoot the problem as soon as possible. The longer you wait, the more likely the situation will worsen and be more steeply-priced to fix.
There are some capacity causes for this problem. Still, a number of the most not unusual consist of grimy condenser coils, a blocked air damper, a faulty temperature sensor, a defective defrost timer, a damaged evaporator fan motor, a clogged refrigerant line, or a leaking refrigerant.
If you can troubleshoot and apply the hassle yourself, this is remarkable. However, suppose you are uncomfortable doing so or need help perceiving the motive of the hassle. In that case, you have to name a certified appliance restore technician.
Here are a few extra hints to help you hold your Kenmore Elite refrigerator in the proper working order:
- Clean the condenser coils regularly.
- Make sure the door gaskets are in excellent situation.
- Do not overload the fridge. Set the temperature placing to an appropriate stage.
- Have the refrigerator serviced via a certified equipment repair technician on an ordinary basis.
By following these tips, you can ensure that your Kenmore Elite refrigerator will provide you with a few years of dependable service.
FAQs (Frequently Asked Questions)
Q: Why is my Kenmore Elite fridge no longer cooling when the freezer works?
A: There are some capacity causes for this problem; however, a number of the most commonplace encompass dirty condenser coils, a blocked air damper, a defective temperature sensor, a faulty defrost timer, a damaged evaporator fan motor, a clogged refrigerant line, or a leaking refrigerant.
Q: How do I ease the condenser coils on my Kenmore Elite refrigerator?
A: Unplug the fridge and pull it away from the wall to smooth the condenser coils. The coils are commonly placed at the bottom of the refrigerator at the back of the grille. Use a vacuum cleaner with a broom attachment to eliminate dirt or debris from the coils. You can also use a coil cleaner to assist in loosening and do away with any stubborn dirt or dirt.
Q: How do I test the air damper on my Kenmore Elite fridge?
A: Unplug the refrigerator and open the freezer door to look at the air damper. You ought to see a vent at the pinnacle of the freezer compartment. The air damper is positioned in the back of the duct. Use a flashlight to appear within the vent and see if the air damper is open. You must clean the obstruction if the air damper is closed or blocked.
Q: How do I look at the temperature sensor on my Kenmore Elite fridge?
A: You will need a multimeter to look at the temperature sensor. Set the multimeter to study ohms and area the probes at the temperature sensor terminals. The resistance must be examined between 10,000 and 15,000 ohms at room temperature. If the resistance is outside this range, the temperature sensor is faulty and must be replaced.
Q: How do I look at the defrost timer on my Kenmore Elite refrigerator?
A: To look at the defrost timer, you may want a multimeter. Set the multimeter to read ohms and region the probes on the defrost timer terminals. The resistance needs to examine 0 ohms while the defrost timer is inside the defrost cycle and endless ohms while the defrost timer is inside the cooling process. If the resistance isn’t as described, the defrost timer is faulty and needs to be replaced.
Q: How do I look at the evaporator fan motor on my Kenmore Elite fridge?
A: To look at the evaporator fan motor, you may want a multimeter. Set the multimeter to study the ohms and region of the probes on the evaporator fan motor terminals. The resistance should be measured between 10 and 20 ohms. Suppose the opposition is out of doors of this variety. In that case, the evaporator fan motor is damaged and desires to be replaced.
Q: How do I test for a refrigerant leak on my Kenmore Elite fridge?
A: You will want a refrigerant leak detector to test for a refrigerant leak. Spray the refrigerant leak detector around all connections within the refrigerant device. If there is a refrigerant leak, the refrigerant leak detector will beep. If you discover a refrigerant leak, you should repair the leak or replace the leaky factor. Q: How do I reset my Kenmore Elite refrigerator? A: To reset your Kenmore Elite fridge, unplug it for a few minutes and then plug it back in.
Q: When must I name a qualified appliance repair technician?
A: If you’ve attempted all of the above troubleshooting recommendations and the refrigerator is still not cooling nicely, you should call a qualified equipment repair technician.
